Welcome!

Python Authors: Matt Davis, Jyoti Bansal, Pat Romanski, Donald Meyer, Liz McMillan

Blog Feed Post

S3 Encryption With Porticor

Your Porticor appliance can encrypt data being stored to Amazon’s Simple Storage Service (S3). Porticor is the only system available that offers the convenience of cloud-based hosted key management without sacrificing trust by requiring someone else to manage the keys. Porticor’s split-key encryption technology protects keys and guarantees they remain under customer control and are never exposed in storage; and with homomorphic key encryption, the keys are protected – even while they are in use.

A variety of applications use S3 to store bulk data, and we support two different ways of enabling Porticor encryption with them.

  1. The first and recommended alternative is to configure the application so that data is written to and read from the Porticor appliance.
  2. Where this is not an option, you can instead configure host-to-IP mapping so that the application writing to s3.amazonaws.com actually writes to the appliance, which encrypts and forwards the data to S3.

These are two options to set up your environment, but the end result is one and the same: your data is encrypted when written to S3 and decrypted when reading from it, with no need to change the client application.

What follows are detailed instructions for both configuration options.

Alternative 1: Explicit Configuration

This alternative depends on the individual application. In fact some S3 clients are hardwired to the Amazon server addresses and cannot be configured. For these clients you must use Alternative 2.

In this alternative you configure the S3 client to connect to a special DNS address for each of your buckets and for the main S3 endpoint. These DNS addresses are installed automatically when you add your S3 “buckets” into the table on the S3 Encryption page. All buckets that are to be encrypted must be listed. If your bucket is called mylittlebucket, it will be mapped to the DNS name mylittlebucket.d.porticor.net.

The specific client configuration depends on the particular client. Following are two examples.

Configuring s3cmd

Edit the file $HOME/.s3cfg, and replace the host_base and host_bucket lines as below, where the long host_base value is your appliance’s address.

# old:
# host_base = s3.amazonaws.com
# host_bucket = %(bucket)s.s3.amazonaws.com

# new:
host_base = itbetb19zy3-pzjy3yty2zw.d.porticor.net
host_bucket = %(bucket)s.d.porticor.net

Configuring S3QL

Edit $HOME/.s3ql/authinfo2, and add a new section:

[porticor]
storage-url: s3c://itbetb19zy3-pzjy3yty2zw.d.porticor.net/bucket-name/
backend-login: aws-key-id
backend-password: aws-secret-key

To create the file system, run:

mkfs.s3ql --plain --ssl s3://bucket-name/

mount.s3ql --ssl s3://bucket-name /mnt/cloud-drive

Note the use of the “s3c” URL method. Both the --ssl and --plain flags are mandatory.

Alternative 2: Host Mapping

With this alternative you configure the host on which your S3 client is running, so that s3.amazonaws.com and bucketname.s3.amazonaws.com are resolved to the IP address of the Porticor appliance. You should not fill in the Bucket table in this alternative.
On Linux, edit the file /etc/hosts and add the lines shown below.
On Windows, add these lines to %windir%\system32\drivers\etc\lmhosts (or ...\hosts, depending on your Windows version).

Appliance-IP bucketname.s3.amazonaws.com # replicate this line for each S3 bucket
Appliance-IP s3.amazonaws.com

Use the so-called “private” IP address (10.x.x.x) of the Porticor appliance, for access from within the EC2 cloud. If you plan to access the appliance from outside the cloud or even from another AWS region you will need to use “public” address instead. Both addresses are listed in the S3 Configuration GUI page.
All communication with the virtual appliance is SSL-protected. In Alternative 2, you should make sure that your project’s CA certificate is installed on the client machine, otherwise your S3 client might refuse to connect.

Additional Notes

  • You need to wait a few minutes after the creation of a new bucket before starting to use it, so that it is recognized by all S3 servers.
  • Note that Porticor does not support “mixed buckets” containing both protected and unprotected objects.
  • Bucket names must conform with the requirements for DNS names, as recommended by Amazon Web Services. In particular they must not contain uppercase letters.

The post S3 Encryption With Porticor appeared first on Porticor Cloud Security.

Read the original blog entry...

More Stories By Gilad Parann-Nissany

Gilad Parann-Nissany, Founder and CEO at Porticor is a pioneer of Cloud Computing. He has built SaaS Clouds for medium and small enterprises at SAP (CTO Small Business); contributing to several SAP products and reaching more than 8 million users. Recently he has created a consumer Cloud at G.ho.st - a cloud operating system that delighted hundreds of thousands of users while providing browser-based and mobile access to data, people and a variety of cloud-based applications. He is now CEO of Porticor, a leader in Virtual Privacy and Cloud Security.

@ThingsExpo Stories
Everywhere we turn in our industry we can find strong opinions about the direction, type and nature of cloud’s impact on computing and business. Another word that is used in every context in our industry is “hybrid.” In his session at 20th Cloud Expo, Alvaro Gonzalez, Director of Technical, Partner and Field Marketing at Peak 10, will use a combination of a few conceptual props and some research recently commissioned by Peak 10 to offer a real-world consideration of how the various categories of...
In his opening keynote at 20th Cloud Expo, Michael Maximilien, Research Scientist, Architect, and Engineer at IBM, will motivate why realizing the full potential of the cloud and social data requires artificial intelligence. By mixing Cloud Foundry and the rich set of Watson services, IBM's Bluemix is the best cloud operating system for enterprises today, providing rapid development and deployment of applications that can take advantage of the rich catalog of Watson services to help drive insigh...
SYS-CON Events announced today that SoftLayer, an IBM Company, has been named “Gold Sponsor” of SYS-CON's 18th Cloud Expo, which will take place on June 7-9, 2016, at the Javits Center in New York, New York. SoftLayer, an IBM Company, provides cloud infrastructure as a service from a growing number of data centers and network points of presence around the world. SoftLayer’s customers range from Web startups to global enterprises.
In his keynote at @ThingsExpo, Chris Matthieu, Director of IoT Engineering at Citrix and co-founder and CTO of Octoblu, focused on building an IoT platform and company. He provided a behind-the-scenes look at Octoblu’s platform, business, and pivots along the way (including the Citrix acquisition of Octoblu).
Multiple data types are pouring into IoT deployments. Data is coming in small packages as well as enormous files and data streams of many sizes. Widespread use of mobile devices adds to the total. In this power panel at @ThingsExpo, moderated by Conference Chair Roger Strukhoff, panelists will look at the tools and environments that are being put to use in IoT deployments, as well as the team skills a modern enterprise IT shop needs to keep things running, get a handle on all this data, and deli...
With major technology companies and startups seriously embracing Cloud strategies, now is the perfect time to attend @CloudExpo | @ThingsExpo, June 6-8, 2017, at the Javits Center in New York City, NY and October 31 - November 2, 2017, Santa Clara Convention Center, CA. Learn what is going on, contribute to the discussions, and ensure that your enterprise is on the right path to Digital Transformation.
Five years ago development was seen as a dead-end career, now it’s anything but – with an explosion in mobile and IoT initiatives increasing the demand for skilled engineers. But apart from having a ready supply of great coders, what constitutes true ‘DevOps Royalty’? It’ll be the ability to craft resilient architectures, supportability, security everywhere across the software lifecycle. In his keynote at @DevOpsSummit at 20th Cloud Expo, Jeffrey Scheaffer, GM and SVP, Continuous Delivery Busine...
DevOps is often described as a combination of technology and culture. Without both, DevOps isn't complete. However, applying the culture to outdated technology is a recipe for disaster; as response times grow and connections between teams are delayed by technology, the culture will die. A Nutanix Enterprise Cloud has many benefits that provide the needed base for a true DevOps paradigm.
SYS-CON Events announced today that WineSOFT will exhibit at SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. Based in Seoul and Irvine, WineSOFT is an innovative software house focusing on internet infrastructure solutions. The venture started as a bootstrap start-up in 2010 by focusing on making the internet faster and more powerful. WineSOFT’s knowledge is based on the expertise of TCP/IP, VPN, SSL, peer-to-peer, mob...
SYS-CON Events announced today that EARP Integration will exhibit at SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. EARP Integration is a passionate software house. Since its inception in 2009 the company successfully delivers smart solutions for cities and factories that start their digital transformation. EARP provides bespoke solutions like, for example, advanced enterprise portals, business intelligence systems an...
SYS-CON Events announced today that delaPlex will exhibit at SYS-CON's @CloudExpo, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. delaPlex pioneered Software Development as a Service (SDaaS), which provides scalable resources to build, test, and deploy software. It’s a fast and more reliable way to develop a new product or expand your in-house team.
SYS-CON Events announced today that Carbonite will exhibit at SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. Carbonite protects your entire IT footprint with the right level of protection for each workload, ensuring lower costs and dependable solutions with DoubleTake and Evault.
SYS-CON Events announced today that Progress, a global leader in application development, has been named “Bronze Sponsor” of SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. Enterprises today are rapidly adopting the cloud, while continuing to retain business-critical/sensitive data inside the firewall. This is creating two separate data silos – one inside the firewall and the other outside the firewall. Cloud ISVs oft...
DevOps at Cloud Expo – being held October 31 - November 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA – announces that its Call for Papers is open. Born out of proven success in agile development, cloud computing, and process automation, DevOps is a macro trend you cannot afford to miss. From showcase success stories from early adopters and web-scale businesses, DevOps is expanding to organizations of all sizes, including the world's largest enterprises – and delivering real r...
SYS-CON Events announced today that Outscale will exhibit at SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. Outscale's technology makes an automated and adaptable Cloud available to businesses, supporting them in the most complex IT projects while controlling their operational aspects. You boost your IT infrastructure's reactivity, with request responses that only take a few seconds.
As cloud adoption continues to transform business, today's global enterprises are challenged with managing a growing amount of information living outside of the data center. The rapid adoption of IoT and increasingly mobile workforce are exacerbating the problem. Ensuring secure data sharing and efficient backup poses capacity and bandwidth considerations as well as policy and regulatory compliance issues.
SYS-CON Events announced today that Cloud Academy will exhibit at SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. Cloud Academy is the industry’s most innovative, vendor-neutral cloud technology training platform. Cloud Academy provides continuous learning solutions for individuals and enterprise teams for Amazon Web Services, Microsoft Azure, Google Cloud Platform, and the most popular cloud computing technologies. Ge...
The 21st International Cloud Expo has announced that its Call for Papers is open. Cloud Expo, to be held October 31 - November 2, 2017, at the Santa Clara Convention Center in Santa Clara, CA, brings together Cloud Computing, Big Data, Internet of Things, DevOps, Digital Transformation, Machine Learning and WebRTC to one location. With cloud computing driving a higher percentage of enterprise IT budgets every year, it becomes increasingly important to plant your flag in this fast-expanding busin...
SYS-CON Events announced today that Interoute has been named “Bronze Sponsor” of SYS-CON's 20th International Cloud Expo®, which will take place on June 6-8, 2017, at the Javits Center in New York City, NY. Interoute is the owner operator of Europe's largest network and a global cloud services platform, which encompasses over 70,000 km of lit fiber, 15 data centers, 17 virtual data centers and 33 colocation centers, with connections to 195 additional partner data centers. Our full-service Unifie...
With major technology companies and startups seriously embracing Cloud strategies, now is the perfect time to attend @CloudExpo | @ThingsExpo, June 6-8, 2017, at the Javits Center in New York City, NY and October 31 - November 2, 2017, Santa Clara Convention Center, CA. Learn what is going on, contribute to the discussions, and ensure that your enterprise is on the right path to Digital Transformation.