|By Chris Evans||
|October 5, 2012 11:51 AM EDT||
This is one of a series of posts discussing the new features in Windows Server 2012, now shipping and previously in public beta as Windows Server 8. You can find references to other related posts at the end of this article. This post reviews the new Hyper-V 3.0 feature, Virtual Fibre Channel.
Virtual Fibre Channel (VFC) enables a Hyper-V guest to access the physical storage HBAs (host bus adaptors) installed in the Hyper-V server. Normally, storage adaptors would be reserved for the use of the Hyper-V guest itself however this new feature acts as a passthrough, enabling any Hyper-V 3.0 guest (at the right O/S level) to access the HBAs and so connect directly to fibre channel storage devices.
VFC is implemented through the use of NPIV, or N_Port ID virtualisation. This a fibre channel standard that permits a single HBA to act as multiple nodes within a SAN environment. Normally, a single HBA connects to the SAN and presents a physical ID known as a World Wide Port Name or WWPN. This deals with the physical connectivity of the fabric. At the same time, the connecting server or storage device presents a node name ID or WWNN (World Wide Node Name). A WWNN can be unique per adaptor as is the case with most host-based HBAs or can be a single node representing an entire device such as a storage array. NPIV allows a single physical adaptor to present multiple node names to the fabric and so effectively “virtualise” the physical device. Each new node also has to have virtual WWPNs in order to adhere with fibre channel standards.
The benefits of being able to use NPIV to virtualise an HBA is that each guest in a Hyper-V environment can be assigned its own WWNN and so have a direct connection to the SAN. It may not be immediately obvious how this helps when virtual server infrastructure is supposed to abstract the physical layer but there are a number of distinct advantages in zoning storage devices in this way:
- Zoning can be done to the individual guest and is therefore more secure (albeit that it still goes through the hypervisor)
- Tape drives can be supported, so backup software can write directly to devices
- Storage that requires failover, snapshots and other SCSI based functionality can be directly supported, especially where non-standard SCSI commands are used
VFC is configured in Hyper-V Manager using the new Virtual SAN Manager option (see the screenshots). Only HBAs and firmware that support NPIV can be used for VFC. This means newer HBAs only, for example Emulex HBAs at speeds of 4Gb/s and above. Obviously the SAN fabric needs to support NPIV too. An HBA can only be attributed to one virtual SAN, however a virtual SAN can contain multiple HBAs. Once the virtual SAN is created, a virtual HBA can be assigned to a guest using the Add Hardware section under Settings. Fibre channel IDs can be set as any 16-digit hexadecimal number, although it’s not advisable to use values that are already reserved out for vendors. Microsoft defaults to some standard values, which can be auto-generated to new values through the “Create Addresses” button. As yet I’ve not worked out why there are two sets of addresses as only the first appears to be visible on the fabric.
As soon as a guest is started, the fabric login process begins, even if no guest O/S has been installed. As you can see from screenshot 4, the additional node indicates the source Hyper-V server (in this case PH03) but doesn’t pass through the guest name, indicating it only as “Hyper-V VM Port”. It would be a nice update to be able to see the VM name there.
Using VFC within the Hyper-V guest requires two things; a supported O/S – one of Windows Server 2008, Windows 2008 R2 or Windows 2012 – plus the installation of the latest Integration Services update that comes with Windows Server 2012. This means that the virtual fibre channel adaptor is not emulated as a native device and so can’t be used with other operating systems like Linux (more on this later). The fifth screenshot shows the emulated HBA controller and tape drive I presented to the host. One question that seems to have been discussed on a number of blogs is the support for tape drives. I can confirm tape drives do work, but can’t see any documentation from Microsoft to say whether they are officially supported.
I chose a tape drive as this is a good way of demonstrating performance. Deploying Backup Exec 2012 onto my Windows 2008 R2 guest, writing to an LTO2 drive, I achieved around 12MB/s, better than I’ve managed with an emulated drive through vSphere 5.0. This is well under the spec of the drive itself (max 40MB/s) but is certainly usable in small environments. More testing is needed here I think, as there appeared to be little overhead on the Hyper-V server to manage the data passthrough.
The Architects View
Virtual Fibre Channel is a great feature for providing native SAN device support. However there are few restrictions on use, most notably on the need to have latest hardware and be using Microsoft platforms. I haven’t yet seen any best practices for using VFC; for example should HBAs be placed in a single virtual SAN or should multiple ones be configured for failover; these are questions that need to be answered. VFC could be massively improved on two fronts; firstly drivers could be provided for other platforms, especially Linux installations. Second, if vendors were able to write code using the virtual device, then virtual SAN appliances (VSA) could use fibre channel rather than be reliant on iSCSI as they are today.
One final comment; Microsoft are doing a poor job of providing detail on these new storage features. There is precious little to find, other than high-level blog information and as mentioned previously, no best practice documentation that I can locate. I’d be happy to be pointed in the direction of anything useful and I will link it from this post.
- Windows Server 2012 (Windows Server “8″) – Storage Spaces
- Windows Server 2012 (Windows Server “8″) – Resilient File System
- Hyper-V Virtual Fibre Channel Overview (technet.microsoft.com)
"IoT is going to be a huge industry with a lot of value for end users, for industries, for consumers, for manufacturers. How can we use cloud to effectively manage IoT applications," stated Ian Khan, Innovation & Marketing Manager at Solgeniakhela, in this SYS-CON.tv interview at @ThingsExpo, held November 3-5, 2015, at the Santa Clara Convention Center in Santa Clara, CA.
Dec. 4, 2016 04:15 PM EST Reads: 4,137
"We're a cybersecurity firm that specializes in engineering security solutions both at the software and hardware level. Security cannot be an after-the-fact afterthought, which is what it's become," stated Richard Blech, Chief Executive Officer at Secure Channels, in this SYS-CON.tv interview at @ThingsExpo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
Dec. 4, 2016 04:15 PM EST Reads: 593
Information technology is an industry that has always experienced change, and the dramatic change sweeping across the industry today could not be truthfully described as the first time we've seen such widespread change impacting customer investments. However, the rate of the change, and the potential outcomes from today's digital transformation has the distinct potential to separate the industry into two camps: Organizations that see the change coming, embrace it, and successful leverage it; and...
Dec. 4, 2016 03:00 PM EST Reads: 3,245
Data is the fuel that drives the machine learning algorithmic engines and ultimately provides the business value. In his session at Cloud Expo, Ed Featherston, a director and senior enterprise architect at Collaborative Consulting, discussed the key considerations around quality, volume, timeliness, and pedigree that must be dealt with in order to properly fuel that engine.
Dec. 4, 2016 02:15 PM EST Reads: 1,991
We are always online. We access our data, our finances, work, and various services on the Internet. But we live in a congested world of information in which the roads were built two decades ago. The quest for better, faster Internet routing has been around for a decade, but nobody solved this problem. We’ve seen band-aid approaches like CDNs that attack a niche's slice of static content part of the Internet, but that’s it. It does not address the dynamic services-based Internet of today. It does...
Dec. 4, 2016 02:00 PM EST Reads: 916
Internet of @ThingsExpo, taking place June 6-8, 2017 at the Javits Center in New York City, New York, is co-located with the 20th International Cloud Expo and will feature technical sessions from a rock star conference faculty and the leading industry players in the world. @ThingsExpo New York Call for Papers is now open.
Dec. 4, 2016 02:00 PM EST Reads: 1,898
What happens when the different parts of a vehicle become smarter than the vehicle itself? As we move toward the era of smart everything, hundreds of entities in a vehicle that communicate with each other, the vehicle and external systems create a need for identity orchestration so that all entities work as a conglomerate. Much like an orchestra without a conductor, without the ability to secure, control, and connect the link between a vehicle’s head unit, devices, and systems and to manage the ...
Dec. 4, 2016 02:00 PM EST Reads: 572
20th Cloud Expo, taking place June 6-8, 2017, at the Javits Center in New York City, NY, will feature technical sessions from a rock star conference faculty and the leading industry players in the world. Cloud computing is now being embraced by a majority of enterprises of all sizes. Yesterday's debate about public vs. private has transformed into the reality of hybrid cloud: a recent survey shows that 74% of enterprises have a hybrid cloud strategy.
Dec. 4, 2016 01:45 PM EST Reads: 2,155
Everyone knows that truly innovative companies learn as they go along, pushing boundaries in response to market changes and demands. What's more of a mystery is how to balance innovation on a fresh platform built from scratch with the legacy tech stack, product suite and customers that continue to serve as the business' foundation. In his General Session at 19th Cloud Expo, Michael Chambliss, Head of Engineering at ReadyTalk, discussed why and how ReadyTalk diverted from healthy revenue and mor...
Dec. 4, 2016 01:30 PM EST Reads: 1,535
The 20th International Cloud Expo has announced that its Call for Papers is open. Cloud Expo, to be held June 6-8, 2017, at the Javits Center in New York City, brings together Cloud Computing, Big Data, Internet of Things, DevOps, Containers, Microservices and WebRTC to one location. With cloud computing driving a higher percentage of enterprise IT budgets every year, it becomes increasingly important to plant your flag in this fast-expanding business opportunity. Submit your speaking proposal ...
Dec. 4, 2016 12:45 PM EST Reads: 2,124
You have great SaaS business app ideas. You want to turn your idea quickly into a functional and engaging proof of concept. You need to be able to modify it to meet customers' needs, and you need to deliver a complete and secure SaaS application. How could you achieve all the above and yet avoid unforeseen IT requirements that add unnecessary cost and complexity? You also want your app to be responsive in any device at any time. In his session at 19th Cloud Expo, Mark Allen, General Manager of...
Dec. 4, 2016 12:30 PM EST Reads: 1,671
The Internet of Things (IoT) promises to simplify and streamline our lives by automating routine tasks that distract us from our goals. This promise is based on the ubiquitous deployment of smart, connected devices that link everything from industrial control systems to automobiles to refrigerators. Unfortunately, comparatively few of the devices currently deployed have been developed with an eye toward security, and as the DDoS attacks of late October 2016 have demonstrated, this oversight can ...
Dec. 4, 2016 12:00 PM EST Reads: 781
"ReadyTalk is an audio and web video conferencing provider. We've really come to embrace WebRTC as the platform for our future of technology," explained Dan Cunningham, CTO of ReadyTalk, in this SYS-CON.tv interview at WebRTC Summit at 19th Cloud Expo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
Dec. 4, 2016 11:45 AM EST Reads: 382
Bert Loomis was a visionary. This general session will highlight how Bert Loomis and people like him inspire us to build great things with small inventions. In their general session at 19th Cloud Expo, Harold Hannon, Architect at IBM Bluemix, and Michael O'Neill, Strategic Business Development at Nvidia, discussed the accelerating pace of AI development and how IBM Cloud and NVIDIA are partnering to bring AI capabilities to "every day," on-demand. They also reviewed two "free infrastructure" pr...
Dec. 4, 2016 11:15 AM EST Reads: 906
Major trends and emerging technologies – from virtual reality and IoT, to Big Data and algorithms – are helping organizations innovate in the digital era. However, to create real business value, IT must think beyond the ‘what’ of digital transformation to the ‘how’ to harness emerging trends, innovation and disruption. Architecture is the key that underpins and ties all these efforts together. In the digital age, it’s important to invest in architecture, extend the enterprise footprint to the cl...
Dec. 4, 2016 11:15 AM EST Reads: 2,211
"Dice has been around for the last 20 years. We have been helping tech professionals find new jobs and career opportunities," explained Manish Dixit, VP of Product and Engineering at Dice, in this SYS-CON.tv interview at 19th Cloud Expo, held November 1-3, 2016, at the Santa Clara Convention Center in Santa Clara, CA.
Dec. 4, 2016 10:45 AM EST Reads: 884
More and more brands have jumped on the IoT bandwagon. We have an excess of wearables – activity trackers, smartwatches, smart glasses and sneakers, and more that track seemingly endless datapoints. However, most consumers have no idea what “IoT” means. Creating more wearables that track data shouldn't be the aim of brands; delivering meaningful, tangible relevance to their users should be. We're in a period in which the IoT pendulum is still swinging. Initially, it swung toward "smart for smar...
Dec. 4, 2016 09:45 AM EST Reads: 558
Successful digital transformation requires new organizational competencies and capabilities. Research tells us that the biggest impediment to successful transformation is human; consequently, the biggest enabler is a properly skilled and empowered workforce. In the digital age, new individual and collective competencies are required. In his session at 19th Cloud Expo, Bob Newhouse, CEO and founder of Agilitiv, drew together recent research and lessons learned from emerging and established compa...
Dec. 4, 2016 09:30 AM EST Reads: 812
Extracting business value from Internet of Things (IoT) data doesn’t happen overnight. There are several requirements that must be satisfied, including IoT device enablement, data analysis, real-time detection of complex events and automated orchestration of actions. Unfortunately, too many companies fall short in achieving their business goals by implementing incomplete solutions or not focusing on tangible use cases. In his general session at @ThingsExpo, Dave McCarthy, Director of Products...
Dec. 4, 2016 09:30 AM EST Reads: 616
Businesses and business units of all sizes can benefit from cloud computing, but many don't want the cost, performance and security concerns of public cloud nor the complexity of building their own private clouds. Today, some cloud vendors are using artificial intelligence (AI) to simplify cloud deployment and management. In his session at 20th Cloud Expo, Ajay Gulati, Co-founder and CEO of ZeroStack, will discuss how AI can simplify cloud operations. He will cover the following topics: why clou...
Dec. 4, 2016 08:00 AM EST Reads: 724